★ Free US shipping over $99Real stock, ships next business dayVoron · ERCF · Ender · Milo · Stinger · Printers for AntsThe Clearout is on — real markdowns, honest pricesdfh.fm — for makers

Wiring and Terminals

Sort by
▾
Clear 36-compartment plastic grid box, 27.5 cm by 17.5 cm by 4.2 cm, with removable dividers and snap latches
Tools & Storage > Small Parts Organizer

Grid Box 27.5cm * 17.5cm * 4.2cm

$8.99
Clear 15-compartment plastic grid box, 17.4 cm by 9.8 cm by 2.2 cm, with removable dividers and blue latch
Tools & Storage > Small Parts Organizer

Grid Box 17.4cm * 9.8cm * 2.2cm

$4.99
Black 15cm USB-A male to USB-C male cable in retail pouch
3D Printer Parts > Electronics > USB Cable

USB-A to USB-C Cable - 15cm

$1.99
AWG 26/0.25mm² Ferrules

AWG 26/0.25mm² Ferrules

$0.99
Black insulated AWG 24 / 0.34mm² bootlace ferrules with tinned crimp sleeves
3D Printer Parts > Wiring & Electrical > Wire Ferrules

AWG 24/0.34mm² Ferrules

$0.99
Black insulated AWG 20 / 0.75mm² bootlace ferrules with tinned crimp sleeves
3D Printer Parts > Wiring & Electrical > Wire Ferrules

AWG 20/0.75mm² Ferrules

$0.99
Black insulated AWG 18 / 1.0mm² bootlace ferrules with tinned crimp sleeves
3D Printer Parts > Wiring & Electrical > Wire Ferrules

AWG 18/1.0mm² Ferrules

$0.99
Green 2-position KANGNEX WJ500V-5.08-2P through-hole PCB screw terminal block, 5.08mm pitch
3D Printer Parts > Electrical > Wire Connectors

2 Pin P=5.08mm Wire to Board Screw Terminal

$0.49
A spool of 30AWG stranded FEP-insulated copper wire — thin-wall, heat-resistant, 10m length, for 3D printer hotend harnesses, endstops, thermistors, and toolhead signal wiring.
3D Printer Parts > Wiring > Stranded FEP Wire

30AWG Stranded FEP Wire x 10m

$9.99
A black 10m coil of 26AWG stranded FEP-insulated wire for 3D printer toolhead harnesses, stepper extensions, probes, and low-voltage wiring.
3D Printer Parts > Wiring > Stranded FEP Wire

26AWG Stranded FEP Wire x 10m

$11.99
1550 piece 2.54mm Dupont connector kit in organizer case with black housings, male headers, and crimp pins
3D Printer Parts > Electrical > Wire Connectors

1550 Piece Set 2.54mm Dupont Connector Kit

$19.99
Red insulated #6 fork spade crimp terminals for 22–18 AWG wire, sold as a 10-pack
3D Printer Parts > Wiring & Electrical > Wire Terminals

Insulated Fork Spade Terminal

$2.49
Molex Micro-Fit 3.0 dual-row 4-circuit connector kit with black housings and crimp terminals
3D Printer Parts > Electrical > Wire Connectors

Molex Micro-Fit Dual Row 4 Circuit Kit

$2.99
Black Molex Micro-Fit 3.0 dual-row 4-circuit plug housing, 43020-0401
3D Printer Parts > Electrical > Wire Connectors

Micro-Fit 3.0 Plug Housing Dual Row 4 Circuits 430200401

$0.99
Black Molex 206461-0200 Micro-Fit+ dual-row 2-circuit receptacle housing
3D Printer Parts > Electrical > Wire Connectors

Molex Micro-Fit 3.0 Dual Row 2 Pin Receptical

$0.99
Molex 43045-1400 black Micro-Fit 3.0 14-circuit right-angle PCB header connector
3D Printer Parts > Electrical > Wire Connectors

Molex 43045-1400 Micro-Fit 3.0 14-Pin 14-Way Female Header Connector

$1.99
Two red fully insulated female quick-disconnect spade terminals with translucent sleeves
3D Printer Parts > Wiring & Electrical > Wire Terminals

Insulated Female Spade Terminal

$2.49
WAGO 221-413 3-conductor COMPACT splicing connector with transparent housing, three orange side-entry levers, and 4 mm² / 24-12 AWG body.
3D Printer Parts > Electrical > Wire Connectors

Wago 221-413

$1.20
230-piece JST-XH 2.54mm connector kit with 2-, 3-, 4-, and 5-pin white housings, PCB headers, and loose crimp terminals
3D Printer Parts > Electrical > Wire Connectors

JST-XH 2.54 230pc Kit

$8.99
Molex 43025-1400 Micro-Fit 3.0 black 14-position dual-row receptacle housing
3D Printer Parts > Electrical > Wire Connectors

Molex Micro-Fit 14 Pin Male

$1.99