Useful Little Kits

Small kits of parts that go together: a hotend with the nozzles it takes, a bed with its heater, the WAGOs a Voron build wants, shafts with their bearings, an extruder rebuild with its fittings and tube. Same parts and same stock as the singles, priced a little under buying them one by one.

Sort by
▾
BMG Clone Extruder Kit (Two Trees) laid out on the bench — internals, PC4-M10 fitting, two ECAS04 collets, two clips, the liner and the tube (White PTFE 3 mm × 1.5 m)
3D Printer Parts > Useful Little Kits

BMG Clone Extruder Kit (Two Trees) — BMG Internals + Push-Fit Fittings + PTFE 300 mm + White PTFE 3 mm × 1.5 m

$24.99
BMG Clone Extruder Kit (Two Trees) laid out on the bench — internals, PC4-M10 fitting, two ECAS04 collets, two clips, the liner and the tube (White PTFE 2.5 mm × 1.5 m)
3D Printer Parts > Useful Little Kits

BMG Clone Extruder Kit (Two Trees) — BMG Internals + Push-Fit Fittings + PTFE 300 mm + White PTFE 2.5 mm × 1.5 m

$24.99
BMG Clone Extruder Kit (Two Trees) laid out on the bench — internals, PC4-M10 fitting, two ECAS04 collets, two clips, the liner and the tube (White PTFE 2 mm × 1.5 m)
3D Printer Parts > Useful Little Kits

BMG Clone Extruder Kit (Two Trees) — BMG Internals + Push-Fit Fittings + PTFE 300 mm + White PTFE 2 mm × 1.5 m

$22.99
Runice RNC Extruder Kit laid out on the bench — internals, PC4-M10 fitting, two ECAS04 collets, two clips, the liner and the tube (White PTFE 3 mm × 1.5 m)
3D Printer Parts > Useful Little Kits

Runice RNC Extruder Kit — BMG Internals + Push-Fit Fittings + PTFE 300 mm + White PTFE 3 mm × 1.5 m

$42.99
Runice RNC Extruder Kit laid out on the bench — internals, PC4-M10 fitting, two ECAS04 collets, two clips, the liner and the tube (White PTFE 2.5 mm × 1.5 m)
3D Printer Parts > Useful Little Kits

Runice RNC Extruder Kit — BMG Internals + Push-Fit Fittings + PTFE 300 mm + White PTFE 2.5 mm × 1.5 m

$42.99
Runice RNC Extruder Kit laid out on the bench — internals, PC4-M10 fitting, two ECAS04 collets, two clips, the liner and the tube (White PTFE 2 mm × 1.5 m)
3D Printer Parts > Useful Little Kits

Runice RNC Extruder Kit — BMG Internals + Push-Fit Fittings + PTFE 300 mm + White PTFE 2 mm × 1.5 m

$40.99
Push-Fit Fittings Kit — PC4-M10 fitting, two ECAS04 collets with blue caps and two orange collet clips
3D Printer Parts > Useful Little Kits

Push-Fit Fittings Kit — PC4-M10 + 2× ECAS04 + 2× Collet Clips

$4.49
BMG Clone Extruder Kit (Two Trees) laid out on the bench — internals, PC4-M10 fitting, two ECAS04 collets, two clips and the tube (Black PTFE 1.5 m)
3D Printer Parts > Useful Little Kits

BMG Clone Extruder Kit (Two Trees) — BMG Internals + Push-Fit Fittings + PTFE 300 mm + Black PTFE 1.5 m

$24.99
BMG Clone Extruder Kit (Two Trees) laid out on the bench — internals, PC4-M10 fitting, two ECAS04 collets, two clips and the tube (Clear FEP 1.5 m)
3D Printer Parts > Useful Little Kits

BMG Clone Extruder Kit (Two Trees) — BMG Internals + Push-Fit Fittings + PTFE 300 mm + Clear FEP 1.5 m

$27.99
Runice RNC Extruder Kit laid out on the bench — internals, PC4-M10 fitting, two ECAS04 collets, two clips and the tube (Black PTFE 1.5 m)
3D Printer Parts > Useful Little Kits

Runice RNC Extruder Kit — BMG Internals + Push-Fit Fittings + PTFE 300 mm + Black PTFE 1.5 m

$42.99
Runice RNC Extruder Kit laid out on the bench — internals, PC4-M10 fitting, two ECAS04 collets, two clips and the tube (Clear FEP 1.5 m)
3D Printer Parts > Useful Little Kits

Runice RNC Extruder Kit — BMG Internals + Push-Fit Fittings + PTFE 300 mm + Clear FEP 1.5 m

$44.99
Hotend Heater + PT1000 Kit — Runice 24V 70W cartridge with red leads and the PT1000 sensor with black braided lead
3D Printer Parts > Useful Little Kits

Hotend Heater + PT1000 Kit — Runice 24V 70W + PT1000 Sensor

$21.99
Hotend Heater + Thermistor Kit — the Runice 70W heater cartridge and 104NT thermistor cartridge in their labeled bags
3D Printer Parts > Useful Little Kits

Hotend Heater + Thermistor Kit — Runice 24V 70W + 104NT Thermistor Cartridge

$18.99
Hotend Heater + Thermistor Kit — Runice 24V 60W cartridge with white leads and the 104NT thermistor cartridge with spring strain relief
3D Printer Parts > Useful Little Kits

Hotend Heater + Thermistor Kit — Runice 24V 60W + 104NT Thermistor Cartridge

$16.99
Hotend Heater + Thermistor Kit — Runice 24V 50W cartridge with braided sleeve and ferrules, and the HT-NTC100K thermistor
3D Printer Parts > Useful Little Kits

Hotend Heater + Thermistor Kit — 24V 50W High-Temp + HT-NTC100K

$12.99
Hotend Heater + Thermistor Kit — 24V 40W cartridge with red leads and the HT-NTC100K thermistor, coiled together
3D Printer Parts > Useful Little Kits

Hotend Heater + Thermistor Kit — 24V 40W + HT-NTC100K

$8.99
Baby Legacy Shafts + Bearings Kit — ten 6 mm stainless shafts and twenty LM6UU bushings on the bench
3D Printer Parts > Useful Little Kits

Baby Legacy Stainless Shafts + LM6UU Bearings Kit — 10 Shafts + 20 Bushings

$54.99
Ten 6 mm stainless linear shafts for the Baby Legacy — 2× 188, 4× 200, 4× 210 mm — fanned on the bench
3D Printer Parts > Useful Little Kits

Baby Legacy Stainless Shaft Set — 10× 6mm (2× 188 + 4× 200 + 4× 210mm)

$34.99
Voron WAGO 221 Set — five 221-412, four 221-413 and three 221-415 lever nuts in rows
3D Printer Parts > Useful Little Kits

Voron WAGO 221 Set — 5× 221-412, 4× 221-413, 3× 221-415

$13.99
LH Stinger Bed Kit — the polyimide heater and the shrink-wrapped carbon fiber bed and carriage plates
3D Printer Parts > Useful Little Kits

LH Stinger Bed Kit — Carbon Fiber Bed + Carriage Plates + 24V Polyimide Heater

$72.99
neXt G Fiber + Nozzle Kit — the DropEffect neXt G Fiber box with three Phaetus XG M4 plated copper nozzles, 0.4 / 0.6 / 0.8 mm
3D Printer Parts > Useful Little Kits

neXt G Fiber + XG M4 Copper Nozzle Kit — Hotend with 0.4 / 0.6 / 0.8 mm

$119.99