Rabbit Poop
$19.99
- Cart Count
1
More payment options at checkout
📦 Ships within 1 business day · median this month: <1h★ Free US shipping over $99
Clearance ERCF v1.1 hardware bundles, sorted by cart count. Rabbit Poop is leftover dfh.fm Enraged Rabbit Carrot Feeder v1/v1.1 stock: bearings, fasteners, magnets, and PTFE fittings packed for 4-, 6-, 9-, or 12-cart builds, with a shafts/rods option if you need the long motion pieces too.
Why this kit exists
- Cheap v1 hardware recovery: the official Enraged Rabbit Project BOM defines ERCF v1.1 as an N-channel system; these bundles are grouped by cart count for that v1/v1.1 hardware family.
- Good for repairs, spares, and salvage builds: buy the bearings, fasteners, magnets, and fittings without paying for a full current-generation ERCF kit.
- Optional shafts/rods included on marked variants: “With Shafts Kit” variants add the long motion set. If you only need that set by itself, use the ERCF Shafts and Threaded Rods Set.
Fitment and reference
- For Enraged Rabbit Carrot Feeder v1/v1.1 builds, repairs, and parts bins.
- Useful around Voron/Klipper multimaterial projects where ERCF v1 hardware is still being built, repaired, or scavenged.
- Primary reference: EtteGit EnragedRabbitProject and the project’s official ERCF v1.1 BOM.
How to choose
- Choose the cart count that matches the ERCF build or spares pile you are supporting: 4, 6, 9, or 12 cart.
- Choose a With Shafts Kit variant if you also need the long rods/shaft set: 2 M5 threaded rods, 2 8mm smooth rods, and 1 5mm D-cut shaft cut for the matching cart count.
- If you are starting fresh and want the newer generation instead of v1 leftovers, compare against the ERCF V2.x Community Edition.
What this is not
- Not a complete ERCF kit and not an ERCF V2/V3 conversion kit.
- Does not include printed parts, electronics/control board, motors, servo, Bondtech-style gears, belts/pulleys, cable chain, toolhead sensor, or firmware unless those are bought separately.
- This is clearance v1/v1.1 surplus. Use the table and variant names as the source of what is in the box.
Contents by cart count
| Item | 4 Cart | 6 Cart | 9 Cart | 12 Cart |
|---|---|---|---|---|
| 608ZZ bearing | 5 | 7 | 10 | 13 |
| MR623 bearing | 2 | 2 | 2 | 2 |
| MR85 ZZ bearing | 5 | 6 | 7 | 8 |
| M10 PTFE press-fit fitting | 10 | 10 | 5 | 13 |
| 6 × 3 mm N35 round magnets | 35 | 25 | 17 | 41 |
| M2 × 8 SHCS | 3 | 3 | 3 | 3 |
| M3 washer, stainless steel | 13 | 10 | 13 | 14 |
| M3 × 40 SHCS | 3 | 3 | 3 | 3 |
| M3 × 20 SHCS | 14 | 14 | 13 | 21 |
| M3 × 16 SHCS | 14 | 17 | 25 | 30 |
| M3 × 12 SHCS | 4 | 4 | 4 | 4 |
| M3 × 8 SHCS | 30 | 36 | 42 | 45 |
| M5 washer | 3 | 3 | 3 | 3 |
| M5 lock nut | 11 | 13 | 14 | 19 |
| M5 hex nut | 5 | 5 | 5 | 5 |
| M5 × 16 BHCS | 2 | 2 | 2 | 2 |
| M5 × 30 BHCS | 8 | 10 | 13 | 16 |
| M3 × 8 BHCS | 6 | 6 | 6 | 6 |
| M3 × 5 × 4 heat-set insert | 44 | 56 | 70 | 75 |
Pair with PTFE tube, Enraged Rabbit Carrot Patch, or the ERCF Toolhead Sensor Kit if your build needs those supporting parts.
Pairs well with
Builder reviews
No reviews yet — built something with this? Be the first.
