Enraged Rabbit Carrot Feeder V2.x Community Edition
$94.99
- Carts
1
More payment options at checkout
ERCF, ERF, ERCT, Toolhead Sensor, Binky, Hat and Toolbox.
Deviations from a standard kit include black nickel heatsets and anodized black 7075 8mm shafts.
All you need is this kit, your own amount of PTFE or FEP Tube and a control board.
| Component | 4 Cart Count | 8 Cart Count | 12 Cart Count |
|---|---|---|---|
| LDO-35STH28-1004A(DFH) RevB or Similar | 1 | 1 | 1 |
| LDO-42STH20-1004A(DFH) RevB or Similar | 1 | 1 | 1 |
| Towerpro MG90S or Similar | 1 | 1 | 1 |
| Binky Encoder | 1 | 1 | 1 |
| Omron D2F-5x | 7 | 11 | 16 |
| WS2812B RGBW | 6 | 10 | 14 |
| Wire for LEDs & micro switches (per meter) | 2 | 3 | 4 |
| BMG Clone extruder gear sets | 6 | 10 | 14 |
| 2020 T-Slot extrusion 147mm | 1 | 0 | 0 |
| 2020 T-Slot extrusion 239mm | 0 | 1 | 0 |
| 2020 T-Slot extrusion 331mm | 0 | 0 | 1 |
| 8mm smooth rods 145mm | 1 | 0 | 0 |
| 8mm smooth rods 237mm | 0 | 1 | 0 |
| 8mm smooth rods 329mm | 0 | 0 | 1 |
| D-cut 5mm shaft 164mm | 1 | 0 | 0 |
| D-cut 5mm shaft 256mm | 0 | 1 | 0 |
| D-cut 5mm shaft 348mm | 0 | 0 | 1 |
| Cutting Blade #4 | 2 | 2 | 2 |
| 608ZZ bearing | 5 | 10 | 15 |
| V623ZZ or 623ZZ bearing | 2 | 2 | 2 |
| MR85ZZ bearings | 6 | 8 | 9 |
| M2x6mm or M2x8mm Self-Tapping | 4 | 4 | 4 |
| M2x8mm Self-Tapping | 10 | 20 | 29 |
| M2x8mm SHCS or M2x10mm SHCS | 6 | 6 | 6 |
| M2.5x16 SHCS | 2 | 2 | 2 |
| M3 threaded inserts (M3x5x4mm) | 48 | 53 | 58 |
| M3x3mm set screws | 10 | 15 | 20 |
| M3x6mm SHCS | 2 | 2 | 2 |
| M3x8mm BHCS | 6 | 6 | 6 |
| M3x8mm FHCS | 6 | 6 | 6 |
| M3x8mm SHCS | 65 | 89 | 113 |
| M3x12mm SHCS | 8 | 8 | 8 |
| M3x16mm SHCS | 12 | 22 | 32 |
| M3x16mm BHCS | 2 | 2 | 2 |
| M3x20mm FHCS | 2 | 2 | 2 |
| M3x20mm SHCS | 11 | 11 | 11 |
| M3x25mm SHCS | 6 | 11 | 16 |
| M3x40mm SHCS | 3 | 3 | 3 |
| M3 T-Spring nuts | 23 | 33 | 42 |
| M3 Washers | 5 | 5 | 5 |
| M3 nut DIN934 | 3 | 3 | 3 |
| M5x30mm BHCS | 3 | 3 | 3 |
| M5x16mm BHCS | 2 | 2 | 2 |
| M5 nylock nuts | 4 | 4 | 4 |
| 2.7mm zip ties | 15 | 17 | 20 |
| 3x2mm round neodymium magnets | 3 | 3 | 3 |
| 5.5 mm ball bearing | 6 | 11 | 16 |
| 6x12mm compression spring with 1mm wire diameter | 2 | 2 | 2 |
| 0.4x4x15 compression spring | 2 | 2 | 2 |
| 6x3mm round neodymium magnets | 10 | 20 | 29 |
| MicroFit Connector Plug 4 Position (43640-0401) | 5 | 5 | 5 |
| MicroFit Connector Plug 5 Position (43640-0501) | 3 | 3 | 3 |
| MicroFit Connector Receptacle 4 Position (43645-0400) | 5 | 5 | 5 |
| MicroFit Connector Receptacle 5 Position (43645-0500) | 3 | 3 | 3 |
| MicroFit3 Female Pin (43030-0007) | 32 | 32 | 32 |
| MicroFit3 Male Pin (43031-0007) | 32 | 32 | 32 |
| Rabbit Hat | 1 | 1 | 1 |
| Tool Box | 1 | 1 | 1 |
| 7X7 Drag Chain 250mm (rounded) | 1* | 0 | 0 |
| 7X7 Drag Chain 350mm (rounded) | 0 | 1* | 0 |
| 7X7 Drag Chain 450mm (rounded) | 0 | 0 | 1* |
| ECAS04 | 16 | 28 | 38 |
| Collet Clip | 16 | 28 | 38 |
| GT2 20T (6mm wide) Pulley (5mm bore) | 3 | 3 | 3 |
| GT2 20T (6mm wide) Toothed Idler (5mm bore) | 1 | 1 | 1 |
| GT2 belt 6mm (open) ~1m | 1 | 1 | 1 |
| GT2 Belt Loop (6mm wide) - 188mm | 1 | 1 | 1 |
* May, or may not, include a full cable chain. We're running low. Still a pretty fucking great deal.
