neXt G Fiber + XG M4 Copper Nozzle Kit — Hotend with 0.4 / 0.6 / 0.8 mm

The Phaetus / DropEffect neXt G Fiber with the three nozzle sizes you actually swap between. The neXt G's native nozzle thread is XG M4 — the nozzle already in the box — so this kit adds one plated-copper XG M4 nozzle in each of 0.4, 0.6 and 0.8 mm. They thread straight into the heater block; nothing to adapt.

What's in the kit

• 1× neXt G Fiber hotend — PT1000, 320°C+, RCC-coated heatbreak, Dragon footprint
• 3× XG M4 plated copper nozzles — 0.4, 0.6 and 0.8 mm, one of each

Why these three

• 0.4 for detail, 0.6 for everyday strength at speed, 0.8 for big fast parts — the sizes a high-flow hotend earns its keep with.
• Plated copper: fast heat transfer and a non-stick tip. For carbon- or glass-filled filament add a hardened steel XG M4 nozzle.

Gotchas

• XG M4, not V6. A V6 nozzle only fits the neXt G through the included UHF adapter nut, and there is one nut in the box.
• Set the firmware to PT1000 before the first heat-up, then PID tune.
• Same parts, same shelf as the singles linked above — if the kit reads sold out, one of its parts is.