dfh.fm
Rabbit Poop
Couldn't load pickup availability
Clearance ERCF v1.1 hardware bundles, sorted by cart count. Rabbit Poop is leftover dfh.fm Enraged Rabbit Carrot Feeder v1/v1.1 stock: bearings, fasteners, magnets, and PTFE fittings packed for 4-, 6-, 9-, or 12-cart builds, with a shafts/rods option if you need the long motion pieces too.
Why this kit exists
- Cheap v1 hardware recovery: the official Enraged Rabbit Project BOM defines ERCF v1.1 as an N-channel system; these bundles are grouped by cart count for that v1/v1.1 hardware family.
- Good for repairs, spares, and salvage builds: buy the bearings, fasteners, magnets, and fittings without paying for a full current-generation ERCF kit.
- Optional shafts/rods included on marked variants: “With Shafts Kit” variants add the long motion set. If you only need that set by itself, use the ERCF Shafts and Threaded Rods Set.
Fitment and reference
- For Enraged Rabbit Carrot Feeder v1/v1.1 builds, repairs, and parts bins.
- Useful around Voron/Klipper multimaterial projects where ERCF v1 hardware is still being built, repaired, or scavenged.
- Primary reference: EtteGit EnragedRabbitProject and the project’s official ERCF v1.1 BOM.
How to choose
- Choose the cart count that matches the ERCF build or spares pile you are supporting: 4, 6, 9, or 12 cart.
- Choose a With Shafts Kit variant if you also need the long rods/shaft set: 2 M5 threaded rods, 2 8mm smooth rods, and 1 5mm D-cut shaft cut for the matching cart count.
- If you are starting fresh and want the newer generation instead of v1 leftovers, compare against the ERCF V2.x Community Edition.
What this is not
- Not a complete ERCF kit and not an ERCF V2/V3 conversion kit.
- Does not include printed parts, electronics/control board, motors, servo, Bondtech-style gears, belts/pulleys, cable chain, toolhead sensor, or firmware unless those are bought separately.
- This is clearance v1/v1.1 surplus. Use the table and variant names as the source of what is in the box.
Contents by cart count
| Item | 4 Cart | 6 Cart | 9 Cart | 12 Cart |
|---|---|---|---|---|
| 608ZZ bearing | 5 | 7 | 10 | 13 |
| MR623 bearing | 2 | 2 | 2 | 2 |
| MR85 ZZ bearing | 5 | 6 | 7 | 8 |
| M10 PTFE press-fit fitting | 10 | 10 | 5 | 13 |
| 6 × 3 mm N35 round magnets | 35 | 25 | 17 | 41 |
| M2 × 8 SHCS | 3 | 3 | 3 | 3 |
| M3 washer, stainless steel | 13 | 10 | 13 | 14 |
| M3 × 40 SHCS | 3 | 3 | 3 | 3 |
| M3 × 20 SHCS | 14 | 14 | 13 | 21 |
| M3 × 16 SHCS | 14 | 17 | 25 | 30 |
| M3 × 12 SHCS | 4 | 4 | 4 | 4 |
| M3 × 8 SHCS | 30 | 36 | 42 | 45 |
| M5 washer | 3 | 3 | 3 | 3 |
| M5 lock nut | 11 | 13 | 14 | 19 |
| M5 hex nut | 5 | 5 | 5 | 5 |
| M5 × 16 BHCS | 2 | 2 | 2 | 2 |
| M5 × 30 BHCS | 8 | 10 | 13 | 16 |
| M3 × 8 BHCS | 6 | 6 | 6 | 6 |
| M3 × 5 × 4 heat-set insert | 44 | 56 | 70 | 75 |
Pair with PTFE tube, Enraged Rabbit Carrot Patch, or the ERCF Toolhead Sensor Kit if your build needs those supporting parts.
Shipping & Returns
Returns:
Thank you for purchasing from dfh.fm. I want you to be completely satisfied with your purchase. If for any reason you are not satisfied, you may return your purchase within 60 days of the original purchase date.
Defective items: Please inspect items upon receipt. If you receive a defective item, you may return it for a full refund or replacement within 90 days of the original purchase date. Please contact me to initiate a return for a defective item.
Non-defective items: If you are not satisfied with a non-defective item, you may return it for a refund within 30 days of the original purchase date. A 20% restocking fee will be deducted from the refund amount, to offset the time and inconvenience, as I am the sole employee processing the return and restocking the item. The fee also covers the costs associated with processing the return. Refunds for non-defective items will be issued through the original payment method.
Preordered items: Due to the nature of preorders, delivery dates are subject to change. Please keep in mind that, If you have preordered an item, it is not eligible for a refund until after it has arrived at the store. Once the item arrives at the store and is inspected, you may request a refund within 30 days of the original purchase date. Please note that refunds for preordered items may take up to 10 days to be issued.
To initiate a return, please open a ticket on the shop’s discord channel, with your order number and the reason for the return. We will provide you with further instructions on how to return your purchase.
Thank you for shopping with us. If you have any questions or concerns, please don't hesitate to contact me, via Discord.
Order alterations and cancellations:
Once an order has ben submitted, no alterations can be made. This includes adding or removing items or canceling orders. You are welcome to return an order, once you have taken receipt, following the returns procedure listed above.
Shipping:
US Shipping is via UPS or USPS. The way it is set up shows the least expensive options for standard, priority and express shipping. I can not take special requests for specific carriers at this time.
International shipping is mostly UPS, as I utilize Zonos/UPS integration to tally extremely accurate import and shipping costs.
I require a telephone and email with international orders and you must make yourself available to the carrier or your customs, should they require more information. If you are unreachable and the package is discarded or rerturned, I will not be responsible for rerturning your shipping cost.
If there is a problem with an international order, it is my choice to refund part or all of the order, or send a replacement.
Addresses are verified through Shopify, but the customer is still responsible for inputting their address in the correct format. Any returns or lost shipments, due to incorrectly addressed packages, are the responsibility of the customer.
