Heater Cartridge 24V 40W

24V 40W hotend heater cartridge with a 1m lead. A straightforward replacement heater for 24V 3D-printer hotends that use a cartridge-style heating element.

Why this one

• 24V / 40W output matches the common heater rating used on many modern printer hotends.
• 1m cable gives enough reach for most toolhead wire runs without immediately needing an extension.
• Good spare to keep on hand when rebuilding a hotend, repairing a damaged lead, or refreshing an older toolhead.

Specifications

• Voltage: 24V DC
• Power: 40W
• Lead length: 1m
• Form: cartridge-style hotend heater
• Store SKU: CHAO-00000100

Fitment notes

• Use only on 24V printer electronics configured for a 40W hotend heater.
• Pair it with a temperature sensor such as the 100K NTC 3950 thermistor for a full hotend refresh.
• Need a different heater? Compare the Slim Heater Cartridge 24V 40W or the 24V 50W Heater Cartridge - 2m Length.

What it is not

• Not a 12V heater. Do not install it on a 12V printer.
• Not a complete hotend kit; heater block, thermistor, connector, and fasteners are not included.
• Check your hotend cartridge bore and wiring termination before installing.