dfh.fm
26AWG Stranded FEP Wire x 10m
Couldn't load pickup availability
10 m of 26 AWG stranded wire with FEP (fluorinated ethylene propylene) insulation for low-voltage 3D-printer wiring where a small, flexible conductor has to live near a hot toolhead, cable chain, or enclosed-printer wiring path.
Why FEP instead of basic PVC hookup wire
- Better heat margin around the toolhead. FEP insulation is used for high-temperature electronics wire, so it is a safer choice than ordinary PVC when the route passes near a hotend, heated chamber, or tight toolhead harness.
- Thin wall, cleaner bundles. FEP insulation keeps the outside diameter down, which matters in Voron-style cable chains, umbilicals, and toolhead looms.
- Stranded conductor. This is stranded, not solid-core wire, so it is the right format for wiring that moves, bends, or needs to be dressed cleanly inside a printer.
Specifications
- Conductor size: 26 AWG stranded copper
- Insulation: FEP, thin-wall fluoropolymer insulation
- Length: 10 m / 32.8 ft
- Color: black, as shown
- Use class: low-voltage 3D-printer signal and light-duty harness wiring
Intended use — 3D printer wiring
- Toolhead harnesses where 30 AWG feels too delicate but 24 AWG is bulkier than needed.
- Stepper motor extension pigtails, endstop loops, probe wiring, fan leads, LED leads, and longer low-current signal runs.
- Voron, Klipper, ERCF, and other enclosed-printer builds where heat-resistant, flexible wiring is preferred.
- Pairs cleanly with JST-XH connectors and Micro-Fit 3.0 connector kits for printer harness work.
Decision guide — which FEP wire gauge do you want?
| Gauge | Best for | Why this gauge |
|---|---|---|
| 30 AWG stranded FEP | Thermistors, probes, endstops, LEDs, and very tight signal bundles | Thinnest and most flexible option for low-current signal wiring |
| 26 AWG stranded FEP (this listing) | Stepper pigtails, longer signal runs, toolhead harnesses, small fans | More current headroom and lower voltage drop while still staying compact |
| 24 AWG stranded FEP | Higher-current fan leads, short heater pigtails, and heavier harness sections | Thicker conductor when the load needs more margin |
What this wire is NOT for
- Heated bed power. Bed wiring needs a much larger conductor sized for the actual bed current.
- AC mains. Use properly rated mains cable and terminals for inlet, PSU, and bed mains wiring.
- Long high-current heater runs. For heater cartridge power, size the wire to the current, run length, connector, and printer safety requirements.
- A substitute for checking current draw. Match wire gauge to the load before wiring motors, heaters, or accessories.
Use this 26 AWG FEP wire when you want a tougher, slightly more forgiving harness wire than 30 AWG without building a bulky loom.
Shipping & Returns
Returns:
Thank you for purchasing from dfh.fm. I want you to be completely satisfied with your purchase. If for any reason you are not satisfied, you may return your purchase within 60 days of the original purchase date.
Defective items: Please inspect items upon receipt. If you receive a defective item, you may return it for a full refund or replacement within 90 days of the original purchase date. Please contact me to initiate a return for a defective item.
Non-defective items: If you are not satisfied with a non-defective item, you may return it for a refund within 30 days of the original purchase date. A 20% restocking fee will be deducted from the refund amount, to offset the time and inconvenience, as I am the sole employee processing the return and restocking the item. The fee also covers the costs associated with processing the return. Refunds for non-defective items will be issued through the original payment method.
Preordered items: Due to the nature of preorders, delivery dates are subject to change. Please keep in mind that, If you have preordered an item, it is not eligible for a refund until after it has arrived at the store. Once the item arrives at the store and is inspected, you may request a refund within 30 days of the original purchase date. Please note that refunds for preordered items may take up to 10 days to be issued.
To initiate a return, please open a ticket on the shop’s discord channel, with your order number and the reason for the return. We will provide you with further instructions on how to return your purchase.
Thank you for shopping with us. If you have any questions or concerns, please don't hesitate to contact me, via Discord.
Order alterations and cancellations:
Once an order has ben submitted, no alterations can be made. This includes adding or removing items or canceling orders. You are welcome to return an order, once you have taken receipt, following the returns procedure listed above.
Shipping:
US Shipping is via UPS or USPS. The way it is set up shows the least expensive options for standard, priority and express shipping. I can not take special requests for specific carriers at this time.
International shipping is mostly UPS, as I utilize Zonos/UPS integration to tally extremely accurate import and shipping costs.
I require a telephone and email with international orders and you must make yourself available to the carrier or your customs, should they require more information. If you are unreachable and the package is discarded or rerturned, I will not be responsible for rerturning your shipping cost.
If there is a problem with an international order, it is my choice to refund part or all of the order, or send a replacement.
Addresses are verified through Shopify, but the customer is still responsible for inputting their address in the correct format. Any returns or lost shipments, due to incorrectly addressed packages, are the responsibility of the customer.
