Micron Classic (120) Acrylic Panel Kit — all six panels

The complete enclosure panel set for a Micron Classic (120 mm) build, every panel cut in acrylic. The official Micron DXF folder calls out six panels — three transparent side/door panels, a transparent top, and a rear and a deck panel that are usually opaque. This kit has all six, laser-cut in acrylic, masking paper still on. Two kits left, priced to go.

What is in the box

• Side and door panels × 3 (TRANSPARENT_Side_and_DoorPanel_x3)
• Top panel × 1 (TRANSPARENT_TopPanel_x1)
• Rear panel × 1 (BLACK_RearPanel_x1, cut in acrylic here)
• Deck panel × 1 (BLACK_DeckPanel_x1, cut in acrylic here)

Specifications

• Material: 3 mm acrylic, protective masking on both faces
• Fit: Micron Classic / Micron R1, 120 mm — cut from the official PrintersForAnts Micron DXF panel set. Not the Micron+ 160/180 panel set.
• Hardware not included: panel clips, twist locks, hinges, foam tape and printed mounts come from the Micron STL set

Goes with

Our Micron Classic Frame, if you are starting from extrusions.