dfh.fm
Enraged Rabbit Carrot Feeder V2.x Community Edition
Shipping calculated at checkout.
Pickup available at Home Office
Usually ready in 24 hours
ERCF, ERF, ERCT, Toolhead Sensor, Binky, Hat and Toolbox.
Deviations from a standard kit include black nickel heatsets and anodized black 7075 8mm shafts.
All you need is this kit, your own amount of PTFE or FEP Tube and a control board.
| Component | 4 Cart Count | 8 Cart Count | 12 Cart Count |
|---|---|---|---|
| LDO-35STH28-1004A(DFH) RevB or Similar | 1 | 1 | 1 |
| LDO-42STH20-1004A(DFH) RevB or Similar | 1 | 1 | 1 |
| Towerpro MG90S or Similar | 1 | 1 | 1 |
| Binky Encoder | 1 | 1 | 1 |
| Omron D2F-5x | 7 | 11 | 16 |
| WS2812B RGBW | 6 | 10 | 14 |
| Wire for LEDs & micro switches (per meter) | 2 | 3 | 4 |
| BMG Clone extruder gear sets | 6 | 10 | 14 |
| 2020 T-Slot extrusion 147mm | 1 | 0 | 0 |
| 2020 T-Slot extrusion 239mm | 0 | 1 | 0 |
| 2020 T-Slot extrusion 331mm | 0 | 0 | 1 |
| 8mm smooth rods 145mm | 1 | 0 | 0 |
| 8mm smooth rods 237mm | 0 | 1 | 0 |
| 8mm smooth rods 329mm | 0 | 0 | 1 |
| D-cut 5mm shaft 164mm | 1 | 0 | 0 |
| D-cut 5mm shaft 256mm | 0 | 1 | 0 |
| D-cut 5mm shaft 348mm | 0 | 0 | 1 |
| Cutting Blade #4 | 2 | 2 | 2 |
| 608ZZ bearing | 5 | 10 | 15 |
| V623ZZ or 623ZZ bearing | 2 | 2 | 2 |
| MR85ZZ bearings | 6 | 8 | 9 |
| M2x6mm or M2x8mm Self-Tapping | 4 | 4 | 4 |
| M2x8mm Self-Tapping | 10 | 20 | 29 |
| M2x8mm SHCS or M2x10mm SHCS | 6 | 6 | 6 |
| M2.5x16 SHCS | 2 | 2 | 2 |
| M3 threaded inserts (M3x5x4mm) | 48 | 53 | 58 |
| M3x3mm set screws | 10 | 15 | 20 |
| M3x6mm SHCS | 2 | 2 | 2 |
| M3x8mm BHCS | 6 | 6 | 6 |
| M3x8mm FHCS | 6 | 6 | 6 |
| M3x8mm SHCS | 65 | 89 | 113 |
| M3x12mm SHCS | 8 | 8 | 8 |
| M3x16mm SHCS | 12 | 22 | 32 |
| M3x16mm BHCS | 2 | 2 | 2 |
| M3x20mm FHCS | 2 | 2 | 2 |
| M3x20mm SHCS | 11 | 11 | 11 |
| M3x25mm SHCS | 6 | 11 | 16 |
| M3x40mm SHCS | 3 | 3 | 3 |
| M3 T-Spring nuts | 23 | 33 | 42 |
| M3 Washers | 5 | 5 | 5 |
| M3 nut DIN934 | 3 | 3 | 3 |
| M5x30mm BHCS | 3 | 3 | 3 |
| M5x16mm BHCS | 2 | 2 | 2 |
| M5 nylock nuts | 4 | 4 | 4 |
| 2.7mm zip ties | 15 | 17 | 20 |
| 3x2mm round neodymium magnets | 3 | 3 | 3 |
| 5.5 mm ball bearing | 6 | 11 | 16 |
| 6x12mm compression spring with 1mm wire diameter | 2 | 2 | 2 |
| 0.4x4x15 compression spring | 2 | 2 | 2 |
| 6x3mm round neodymium magnets | 10 | 20 | 29 |
| MicroFit Connector Plug 4 Position (43640-0401) | 5 | 5 | 5 |
| MicroFit Connector Plug 5 Position (43640-0501) | 3 | 3 | 3 |
| MicroFit Connector Receptacle 4 Position (43645-0400) | 5 | 5 | 5 |
| MicroFit Connector Receptacle 5 Position (43645-0500) | 3 | 3 | 3 |
| MicroFit3 Female Pin (43030-0007) | 32 | 32 | 32 |
| MicroFit3 Male Pin (43031-0007) | 32 | 32 | 32 |
| Rabbit Hat | 1 | 1 | 1 |
| Tool Box | 1 | 1 | 1 |
| 7X7 Drag Chain 250mm (rounded) | 1 | 0 | 0 |
| 7X7 Drag Chain 350mm (rounded) | 0 | 1 | 0 |
| 7X7 Drag Chain 450mm (rounded) | 0 | 0 | 1 |
| ECAS04 | 16 | 28 | 38 |
| Collet Clip | 16 | 28 | 38 |
| GT2 20T (6mm wide) Pulley (5mm bore) | 3 | 3 | 3 |
| GT2 20T (6mm wide) Toothed Idler (5mm bore) | 1 | 1 | 1 |
| GT2 belt 6mm (open) ~1m | 1 | 1 | 1 |
| GT2 Belt Loop (6mm wide) - 188mm | 1 | 1 | 1 |
Shipping & Returns
Worldwide shipping available. Most items ship within 24 hours. More information may be found on our shipping policy page.
