WAGO 221-415 5-conductor COMPACT splicing connector, transparent housing, five orange side-entry levers on a 4 mm² / 24-12 AWG body.WAGO 221-415 5-conductor COMPACT splicing connector, transparent housing, five orange side-entry levers on a 4 mm² / 24-12 AWG body.
WAGO 221-415 5-conductor COMPACT splicing connector, transparent housing, five orange side-entry levers on a 4 mm² / 24-12 AWG body.

Wago

Wago 221-415

$1.29
Shipping calculated at checkout.
5.0

The WAGO 221-415 5-conductor COMPACT splicing connector — the lever-actuated wire nut that replaced the twist-cap on every Voron and Klipper build we know. Five side-entry levers, 32 A / 450 V rating, transparent housing with inspection windows on both sides, and a verified 0.14–4 mm² / 24–12 AWG range for solid, stranded, and fine-stranded copper. One potential, one tidy bundle, zero tools.

Why this over the alternative

  • Lever, not twist. Strip 11 mm, lift the orange lever, drop the wire, snap it down. Reusable, rewireable, and far faster on prototype and printer harnesses than any wire nut or crimp.
  • Five conductors in one body. Use the 5-port 221-415 for junction points where you’re landing power, ground, and signal together (PSU outputs, BTT relay boards, mean-well harnesses, Neptune 4 toolhead PCBs). Two- and three-port siblings (221-412, 221-413) cover the simpler drops.
  • Inspection windows on both faces. Front and rear test ports let you probe with a multimeter without levering the wire out — invaluable on a printer that’s been running six months.
  • WAGO CAGE CLAMP® pressure plate. Gas-tight copper contact that holds its grip under thermal cycling, not a spring-finger that loosens over time.

Specifications

  • Type: 221-415 COMPACT splicing connector, 5-conductor, with operating levers
  • Rated current (IEC/EN 60664): 32 A
  • Rated voltage (II/2): 450 V; surge 4 kV
  • UL 1059 (Use Group C): 600 V / 20 A
  • Nominal cross-section: 4 mm²
  • Solid / stranded conductor: 0.2–4 mm² (24–12 AWG)
  • Fine-stranded conductor: 0.14–4 mm² (24–12 AWG)
  • Strip length: 11 mm / 0.43 in
  • Connection points / potentials: 5 / 1
  • Wiring: Side-entry
  • Housing: Transparent, UL94 V-0
  • Operating temp: −40 °C to +85 °C (manufacturer spec)

Intended use

WAGO 221-415 connectors are the de-facto mains-voltage and low-voltage DC splicing part for Voron 0.2 / 1.8 / 2.4, V-Core 3, Klipper toolhead boards, BTT SKR / Octopus harnesses, Mean Well LRS / RSP power-supply landings, and any 3D-printer or LED-strip run-and-return where you need to bundle three to five conductors in one junction. Also widely used in ceiling-rose and ceiling-fan wiring, landscape lighting, low-voltage cabinet runs, and anywhere you want the option to rewire without cutting.

Decision guide (221 series)

  • 2 conductors (221-412): 1-in / 1-out extensions, or a single drop that just continues the run.
  • 3 conductors (221-413): 2-in / 1-out tee, or a 3-way splice in a switch loop.
  • 5 conductors (221-415): 2–4 way tee with a hot + neutral + ground landing, or any bundle where you’d otherwise reach for a wire-nut + tape.

What it is NOT

  • Not waterproof. Needs an IP-rated enclosure, junction box, or conformal boot for outdoor or condensation-prone runs.
  • Not for aluminum. WAGO 221 series is copper-only. For Al/Cu transitions use the WAGO 221/277/773 series rated for the conductor pair.
  • Not a switch / not fused. Pure passive splice; one potential across all 5 levers.
  • Not for fine-stranded below 24 AWG. Minimum is 24 AWG / 0.14 mm².
“Wagos make life so much easier.” — verified 3D-printer builder, 2023
Shipping & Returns

Returns:

Thank you for purchasing from dfh.fm. I want you to be completely satisfied with your purchase. If for any reason you are not satisfied, you may return your purchase within 60 days of the original purchase date.

Defective items: Please inspect items upon receipt. If you receive a defective item, you may return it for a full refund or replacement within 90 days of the original purchase date. Please contact me to initiate a return for a defective item.

Non-defective items: If you are not satisfied with a non-defective item, you may return it for a refund within 30 days of the original purchase date. A 20% restocking fee will be deducted from the refund amount, to offset the time and inconvenience, as I am the sole employee processing the return and restocking the item. The fee also covers the costs associated with processing the return. Refunds for non-defective items will be issued through the original payment method.

Preordered items: Due to the nature of preorders, delivery dates are subject to change. Please keep in mind that, If you have preordered an item, it is not eligible for a refund until after it has arrived at the store. Once the item arrives at the store and is inspected, you may request a refund within 30 days of the original purchase date. Please note that refunds for preordered items may take up to 10 days to be issued.

To initiate a return, please open a ticket on the shop’s discord channel, with your order number and the reason for the return. We will provide you with further instructions on how to return your purchase.

Thank you for shopping with us. If you have any questions or concerns, please don't hesitate to contact me, via Discord.

Order alterations and cancellations:

Once an order has ben submitted, no alterations can be made. This includes adding or removing items or canceling orders. You are welcome to return an order, once you have taken receipt, following the returns procedure listed above.

Shipping:

US Shipping is via UPS or USPS. The way it is set up shows the least expensive options for standard, priority and express shipping. I can not take special requests for specific carriers at this time. 

International shipping is mostly UPS, as I utilize Zonos/UPS integration to tally extremely accurate import and shipping costs. 

I require a telephone and email with international orders and you must make yourself available to the carrier or your customs, should they require more information. If you are unreachable and the package is discarded or rerturned, I will not be responsible for rerturning your shipping cost. 

If there is a problem with an international order, it is my choice to refund part or all of the order, or send a replacement. 

Addresses are verified through Shopify, but the customer is still responsible for inputting their address in the correct format. Any returns or lost shipments, due to incorrectly addressed packages, are the responsibility of the customer.