dfh.fm
SKR Mini E3 V2.0 Thermistor Expander by Timmit99
Couldn't load pickup availability
Add two thermistor inputs to a BTT SKR Mini E3 using the TFT header. This Timmit99 / Voron-Hardware expander gives SKR Mini E3 V1.2, V2.0, and V3.0 boards two additional temperature-sensor channels for Klipper builds without giving up the EXP1 or SPI display headers.
Why use this board
- Adds two extra thermistor channels for chamber, electronics-bay, exhaust, or spare temperature monitoring.
- Uses the SKR Mini E3 TFT header: T0 on TX2 / PA2 and T1 on RX2 / PA3.
- Designed to pair cleanly with the SKR Mini v1/v2 screen adaptor by Timmit99 when the EXP1 and SPI headers are already committed to a display.
- Works with Klipper's standard
[temperature_sensor]configuration; boards with 4.7K pullups use Klipper's default pullup value.
Specifications
- Project: Voron-Hardware SKR-Mini TFT Thermistor Board by Timmit99.
- Compatible control boards: BIGTREETECH SKR Mini E3 V1.2, V2.0, and V3.0.
- Thermistor inputs: two channels, T0 and T1.
- Pin mapping: T0 = TX2 / PA2; T1 = RX2 / PA3.
- Pullup: standard design uses 4.7K pullups, matching Klipper's default.
- Connectors: two 2-pin JST-XH thermistor sockets, 5-pin 2.54mm Dupont TFT-header connector, and 1-pin 3.3V jumper pin.
- Included: assembled thermistor expander PCB.
Fitment and setup notes
- Use it when your SKR Mini E3 build needs more temperature inputs than the mainboard provides, especially Voron V0 / Ender-style Klipper conversions with chamber or electronics-bay sensing.
- Pair it with a 100K NTC 3950 thermistor or other Klipper-supported thermistor as needed; thermistors are not included with this board.
- Install with the board on the TFT header and run the single 3.3V jumper to the SKR Mini E3 SWD 3.3V pin per the Voron-Hardware installation notes.
Klipper gotcha
Check the resistor markings on your board before final configuration. If the resistor is marked 4701, use Klipper's default pullup. If it is marked 1001, add pullup_resistor: 1000 in that [temperature_sensor] section.
[temperature_sensor chamber]
sensor_type: Generic 3950
sensor_pin: PA2
# pullup_resistor: 1000 # only if the board resistor is marked 1001What it is not
- Not a standalone MCU, CAN board, heater expander, fan expander, or RTD amplifier.
- Not a replacement for the broader Klipper Expander by Timmit99 if you also need MOSFET outputs or a separate Klipper MCU.
“Works on the SKR Mini E3 V3.0 as well. Currently using this successfully on my V0.”
Shipping & Returns
Returns:
Thank you for purchasing from dfh.fm. I want you to be completely satisfied with your purchase. If for any reason you are not satisfied, you may return your purchase within 60 days of the original purchase date.
Defective items: Please inspect items upon receipt. If you receive a defective item, you may return it for a full refund or replacement within 90 days of the original purchase date. Please contact me to initiate a return for a defective item.
Non-defective items: If you are not satisfied with a non-defective item, you may return it for a refund within 30 days of the original purchase date. A 20% restocking fee will be deducted from the refund amount, to offset the time and inconvenience, as I am the sole employee processing the return and restocking the item. The fee also covers the costs associated with processing the return. Refunds for non-defective items will be issued through the original payment method.
Preordered items: Due to the nature of preorders, delivery dates are subject to change. Please keep in mind that, If you have preordered an item, it is not eligible for a refund until after it has arrived at the store. Once the item arrives at the store and is inspected, you may request a refund within 30 days of the original purchase date. Please note that refunds for preordered items may take up to 10 days to be issued.
To initiate a return, please open a ticket on the shop’s discord channel, with your order number and the reason for the return. We will provide you with further instructions on how to return your purchase.
Thank you for shopping with us. If you have any questions or concerns, please don't hesitate to contact me, via Discord.
Order alterations and cancellations:
Once an order has ben submitted, no alterations can be made. This includes adding or removing items or canceling orders. You are welcome to return an order, once you have taken receipt, following the returns procedure listed above.
Shipping:
US Shipping is via UPS or USPS. The way it is set up shows the least expensive options for standard, priority and express shipping. I can not take special requests for specific carriers at this time.
International shipping is mostly UPS, as I utilize Zonos/UPS integration to tally extremely accurate import and shipping costs.
I require a telephone and email with international orders and you must make yourself available to the carrier or your customs, should they require more information. If you are unreachable and the package is discarded or rerturned, I will not be responsible for rerturning your shipping cost.
If there is a problem with an international order, it is my choice to refund part or all of the order, or send a replacement.
Addresses are verified through Shopify, but the customer is still responsible for inputting their address in the correct format. Any returns or lost shipments, due to incorrectly addressed packages, are the responsibility of the customer.
