BigTreeTech
BTT Manta M8P Control Board
Couldn't load pickup availability
BIGTREETECH Manta M8P Klipper control board with eight driver sockets and direct CB1/CM4 support. Use it as the main controller for larger CoreXY and multi-motor builds where you want the printer MCU and Klipper host connection kept compact.
Why this board
- Eight stepper-driver sockets for high-axis-count printers and toolchanger-style builds.
- Klipper-first layout with a board-to-board connector for a BIGTREETECH CB1 or Raspberry Pi CM4-style compute module.
- 12V/24V printer input with separate high-voltage driver input support documented by BIGTREETECH for compatible drivers.
- Flexible driver support: UART for TMC2209-class drivers, SPI for TMC5160-class drivers, and STEP/DIR support for common StepStick-format drivers.
- Expansion room for BLTouch/probe wiring, filament detection, RGB, display connections, USB, LAN, and CAN on supported M8P revisions.
Specifications
- Board family: BIGTREETECH Manta M8P
- MCU family: STM32 32-bit controller, per BIGTREETECH M8P documentation
- Driver sockets: 8
- Supported driver modes: UART, SPI, STEP/DIR
- Supported drivers: TMC2209, TMC5160, TMC2208, TMC2225/TMC2226, TMC2130, ST820, LV8729, DRV8825, A4988, and compatible StepStick-format modules
- Printer power: DC 12V or 24V input
- Typical machine fit: larger Klipper printers such as Voron 2.4, VzBot, CoreXY, Cartesian, Delta, Kossel, and Ultimaker-style machines
Variant guide
- Manta M8P: board only; bring your own compute module and stepper drivers.
- + CB1 Pi Replacement: adds the BIGTREETECH CB1 compute module for a compact Klipper host setup.
- + 8 x TMC2209: adds eight UART drivers for quiet, mainstream Klipper/Marlin motion control. Need singles instead? See the BTT TMC2209 v1.2 Stepper Driver.
- + 6 x TMC2209 + 2 x 5160 PRO: gives you six quiet UART drivers plus two higher-power SPI drivers for builds that put more load on selected axes.
Good pairings
- U2C CAN Interface Board for CAN-bus expansion.
- EBB36 CAN Toolhead Board when you want to reduce toolhead wiring on a CAN setup.
- BTT Manta M5P Control Board if you need fewer driver sockets and want a smaller sibling board.
What it is not
- Not a standalone Raspberry Pi; choose a CB1/CM4-equipped variant or supply your own Klipper host.
- Not pre-configured firmware. You still need to set jumpers, flash the MCU, and build your Klipper configuration for your printer.
- Do not assume every M8P revision has identical connectors. Check the silkscreen and BIGTREETECH manual for your exact board before wiring CAN, fans, or high-voltage drivers.
Shipping & Returns
Returns:
Thank you for purchasing from dfh.fm. I want you to be completely satisfied with your purchase. If for any reason you are not satisfied, you may return your purchase within 60 days of the original purchase date.
Defective items: Please inspect items upon receipt. If you receive a defective item, you may return it for a full refund or replacement within 90 days of the original purchase date. Please contact me to initiate a return for a defective item.
Non-defective items: If you are not satisfied with a non-defective item, you may return it for a refund within 30 days of the original purchase date. A 20% restocking fee will be deducted from the refund amount, to offset the time and inconvenience, as I am the sole employee processing the return and restocking the item. The fee also covers the costs associated with processing the return. Refunds for non-defective items will be issued through the original payment method.
Preordered items: Due to the nature of preorders, delivery dates are subject to change. Please keep in mind that, If you have preordered an item, it is not eligible for a refund until after it has arrived at the store. Once the item arrives at the store and is inspected, you may request a refund within 30 days of the original purchase date. Please note that refunds for preordered items may take up to 10 days to be issued.
To initiate a return, please open a ticket on the shop’s discord channel, with your order number and the reason for the return. We will provide you with further instructions on how to return your purchase.
Thank you for shopping with us. If you have any questions or concerns, please don't hesitate to contact me, via Discord.
Order alterations and cancellations:
Once an order has ben submitted, no alterations can be made. This includes adding or removing items or canceling orders. You are welcome to return an order, once you have taken receipt, following the returns procedure listed above.
Shipping:
US Shipping is via UPS or USPS. The way it is set up shows the least expensive options for standard, priority and express shipping. I can not take special requests for specific carriers at this time.
International shipping is mostly UPS, as I utilize Zonos/UPS integration to tally extremely accurate import and shipping costs.
I require a telephone and email with international orders and you must make yourself available to the carrier or your customs, should they require more information. If you are unreachable and the package is discarded or rerturned, I will not be responsible for rerturning your shipping cost.
If there is a problem with an international order, it is my choice to refund part or all of the order, or send a replacement.
Addresses are verified through Shopify, but the customer is still responsible for inputting their address in the correct format. Any returns or lost shipments, due to incorrectly addressed packages, are the responsibility of the customer.
