Micron DOOM Kit
Contents: category item count bed 180mm black, annodized ultra-flat bed, by Lighweight Labware and DFH 1 bed 180mm Double sided, tecture coated/smooth PEI, spring steel sheet, featuring the Micron logo on...
Description
Contents:
category | item | count |
bed | 180mm black, annodized ultra-flat bed, by Lighweight Labware and DFH | 1 |
bed | 180mm Double sided, tecture coated/smooth PEI, spring steel sheet, featuring the Micron logo on the smooth side | 1 |
bed | 192mm magnetic sheet | 1 |
extruder | PTFE/FEP tube 2.5mm ID, 4mm OD, 1m length | 1 |
extruder | PTFE tube 2mm ID, 4mm OD, 300mm length | 1 |
extruder | PC4-M10 pneumatic fitting | 1 |
extruder | ECAS04 press fit bowden fitting | 1 |
extruder | Orange clip for ECAS04 | 1 |
extruder | RNC coated BMG Clone Gears, by Runice | 1 |
motion | F623-2RS Bearing | 32 |
motion | 625 2RS Bearing | 8 |
motion | 5x47-50mm Shaft - Grind Flat | 4 |
motion | KGLM-03 Bearings, by Igus | 4 |
motion | GT2 16T Pulley (5mm bore, 6mm wide) | 14 |
motion | GT2 Belt Loop (6mm wide) - 188mm | 4 |
motion | GT2 Open Belt LL-2GT-6 (6mm wide) | 6 |
cooling | Gdstime 6020 axial fan | 1 |
cooling | Gdstime 3010 axial fan | 1 |
cooling | Gdstime 3010 blower fan | 2 |
wiring and electrical | 1m Igus Chainflex® CF113-007-D | 1 |
wiring and electrical | 10m 24awg FEP Black | 1 |
wiring and electrical | 1m each 18awg FEP Black, Red, White, Green | 1 |
wiring and electrical | Fork spade terminal ten pack | 1 |
wiring and electrical | Female spade terminal ten pack | 1 |
wiring and electrical | M12.5 cable gland | 2 |
wiring and electrical | Molex Micro-Fit 3.0 connector kit | 1 |
wiring and electrical | JST-XH connector kit | 1 |
wiring and electrical | C14 inlet with fuse | 1 |
wiring and electrical | Fuse two pack | 1 |
wiring and electrical | Slim zip tie 40 pack | 1 |
control | BigTreeTech Manta | 1 |
control | BigTreeTech CB1 Pi replacement | 1 |
control | BigTreeTech TMC2209 | 6 |
control | BigTreeTech EBB36 CAN toolhead board | 1 |
control | BigTreeTech U2C CAN interface board | 1 |
motors | Motors kit by DFH | 1 |
frame | Frame kit, by Lightweight Labware and DFH | 1 |
vibration management | EPDM rubber feet. Direct clones of Misumi C-30-RK-3215. | 4 |
fasteners kit | Complete fasteners kit by DFH | 1 |
misc | Best sticker ever | 1 |
misc | Micron keychain | 1 |
There are extra extrusion and double panels, so these things aren't gonna be light. I will try to keep shipping costs as low as possible.
Additional Information
Print Area |
120mm, 180mm |
---|---|
Frame Color |
White, Definitely Not Space Grey, Black, Purple, Hot Fucking Pink |