dfh.fm
Salad Fork Starter Kit
Shipping calculated at checkout.
Pickup available at Home Office
Usually ready in 24 hours
The Salad Fork is a 3D Printer for Ants, based on Voron Trident and scaled down to use 1515, instead of 2020, aluminum extrusions.
This is a Salad Fork v1.0 kit, which is almost complete. You're gonna need panels, MCU and a hotend.
Here's what you get:
| Part Type | Component | Amount Included |
|---|---|---|
| Hardware/Fasteners | M2x6 BHCS | 111 |
| Hardware/Fasteners | M2x10 Self-Tapping | 22 |
| Hardware/Fasteners | M2x12 SHCS | 15 |
| Hardware/Fasteners | M3 0.5mm shims | 47 |
| Hardware/Fasteners | M3x6 BHCS | 104 |
| Hardware/Fasteners | M3x6 SHCS | 18 |
| Hardware/Fasteners | M3x8 BHCS | 89 |
| Hardware/Fasteners | M3x8 SHCS | 15 |
| Hardware/Fasteners | M3x10 BHCS | 141 |
| Hardware/Fasteners | M3x10 SHCS | 22 |
| Hardware/Fasteners | M3x12 BHCS | 94 |
| Hardware/Fasteners | M3x12 SHCS | 33 |
| Hardware/Fasteners | M3x16 SHCS | 6 |
| Hardware/Fasteners | M3x20 SHCS | 15 |
| Hardware/Fasteners | M3x25 BHCS | 33 |
| Hardware/Fasteners | M3x25 SHCS | 15 |
| Hardware/Fasteners | M3x30 BHCS | 11 |
| Hardware/Fasteners | M3x35 BHCS | 10 |
| Hardware/Fasteners | M3x35 SHCS | 8 |
| Hardware/Fasteners | M5x10 BHCS | 8 |
| Hardware/Fasteners | M5x16 BHCS | 6 |
| Hardware/Fasteners | M5 Hex Nut | 6 |
| Hardware/Fasteners | M3 Lock Nut | 11 |
| Hardware/Fasteners | M3 Hex Nut | 281 |
| Hardware/Fasteners | M2 Hex Nut | 68 |
| Hardware/Fasteners | M3 (5x4) Heatset Insert | 62 |
| Hardware/Fasteners | M4 Knurled Nut | 6 |
| Hardware/Fasteners | 6x3 Neodymium Magnets | 36 |
| Motion | F623-RS Flanged Bearing | 24 |
| Motion | GE5C Spherical Bearing | 3 |
| Motion | TR8x8 Anti-Backlash Leadscrew Nut | 3 |
| Motion | GT-2 6mm Belt 4m | 1 |
| Motion | GT-2 20T 6mm Pulleys (5mm Bore) | 2 |
| Motion | Nema14 Stepper Motor | 2 |
| Motion | Nema14 Pancake Stepper Motor | 1 |
| Motion | Nema17 Integrated Leadscrew Stepper Motor | 3 |
| Motion 160mm | MGN-7H 200 Linear Rail 440c | 3 |
| Motion 160mm | MGN-7H 230 Linear Rail 440c | 2 |
| Motion 160mm | MGN-9C 210 440c | 1 |
| Frame 160mm | HFS3-1515-270 | 5 |
| Frame 160mm | HFS3-1515-175 | 1 |
| Frame 160mm | HFS3-1515-300 | 6 |
| Frame 160mm | HFS3-1515-400 | 4 |
| Frame 160mm | HFS3-1515-230 | 1 |
| Frame 160mm | HFS3-1515-240 | 1 |
| Frame 160mm | HFS3-1515-170 | 1 |
| Electronics | V0 display | 1 |
| Electronics | Slim Zip Tie Set | 1 |
| Electronics | Fork Spade Terminals (10) | 1 |
| Electronics | JST Kit | 1 |
| Electronics | Micro-Fit 3.0 Kit | 1 |
| Electronics | Female Spade Terminals (10 | 1 |
| Electronics | Meanwell UHP-200-24 Power Supply | 1 |
| Electronics | Omron SSR | 1 |
| Electronics | Omron D2F Micro Switch | 4 |
| Electronics | 24AWG Wire Silicone/PTFE 150 Feet | 1 |
| Electronics | 20AWG Wire Silicone/PTFE 10 Feet | 1 |
| Electronics | IEC 320-C14 AC Inlet | 1 |
| Electronics | 8A 250V 5x20mm Fuse | 1 |
| Electronics | C13 Power Cord | 1 |
| Electronics | 7mm x 7mm Cable Chain | 1 |
| Electronics | 4010 Axial fan (24V) | 2 |
| Electronics | DIN rail | 2 |
| Toolhead | BMG Gear Set | 1 |
| Toolhead | 3010 Blower Fan (24V) | 2 |
| Toolhead | 3010 Axial Fan (5V) | 1 |
| Toolhead | 4mm OD 2mm ID PTFE Tube 300mm | 1 |
| Toolhead | 4mm OD 2.5mm ID Clear FEP Tube 1.5m | 1 |
| Bed 160mm | 165mm Ultraflat Bed | 1 |
| Bed 160mm | 160 Full Plate 120v/300w Universal Silicone Heater | 1 |
| Bed 160mm | 180mm Magnetic Pad with high temp adhesive | 1 |
| Bed 160mm | 160mm Blank Flex Plate | 1 |
| Bed 160mm | 180mm PEI Sheet | 1 |
| Misc | Rubber Feet | 4 |
| Misc | 5x25mm Pin | 1 |
| Misc | Salad Fork LED Push Button Switch | 1 |
2 in stock
Shipping & Returns
Worldwide shipping available. Most items ship within 24 hours. More information may be found on our shipping policy page.
